Quick Tips: How To Drain Your Water Heater

Every homeowner should know how to drain a hot water heater. Over time, sediment can build up in the bottom of your tank which can cause problems. Draining your hot water heater is easy. Here’s a quick step-by-step guide on how to drain a water heater.

1. Turn off the water supply- If its electric, turn off the power at the breaker box. If its gas, turn the thermostat to the pilot setting. Connect a drain hose to the valve near the thermostat and turn off the cold water supply.
2. Drain the water- To prevent forming a vacuum, turn on one of the hot water faucets in your hosue (the tub, the sink, etc.). Open the drain valve on the hot water heater. Make sure the end of the hose that the hot water is draining out of is far away from anything that could be damaged by hot water.
3. Get rid of any remaining sediment- Once all the hot water has drained out of the water heater, turn the cold water supply back on to flush out any sediment that remains in the hot water heater. Once all sediment has been washed out, close the drain valve and turn off the faucet inside your house. Make sure to read all the warning labels and instructions that go with your hot water heater- some hot water heaters need to remain full in order to prevent any damage.
4. Check the pressure release valve- Turn your power supply back on once your tank has refilled. Once the temperature has come back up, check your pressure release valve by using the instructions that came with your hot water heater.

For all your water heater and plumbing needs, call Masterflo Plumbing at (678) 822-7095 today!